عکس کاور خود را تغییر دهید
tolaminejad
عکس کاور خود را تغییر دهید
مهندسی مواداستادیار
وضعیت این حساب کاربری منتشر شده است

این کاربر هنوزاطلاعات پروفایل خود را بروز نکرده است.

<div id="more">اطلاعات بیشتر</div>
دکتری تخصصی
081-38411444

Mechanical Properties - Metal Forming

Nanostructured Materials/ SPD - Texture

Thermo-mechanics - Welding Metallurgy

<div id="pub">تالیفات</div>
<div id="articles">مقالات چاپ شده در نشریات داخلی و بین المللی</div>

  • Z. Sangari Motlagh, B. Tolaminejad and A. Momeni, "Prediction of hot deformation flow curves of 1.4542 stainless steel", Metals and Materials International2020, (ISI).

  •  S. Ghadar, A. Momeni, B. Tolaminejad and M. Soltanalinejad, "A comparative study on the hot deformation behavior of 410 stainless and K100 tool steels", Materials Science and Engineering: A2019Vol. 760, pp. 394-406 (ISI).

  •  F. Mahheidary, B. Tolaminejad and A. Momeni, "Surface composite on Cu substrate with SiO2 reinforcement fabricated by severe plastic deformation: Microstructure, mechanical and tribological properties", Journal of Alloys and Compounds, 2019Vol. 793, pp. 86-95 (ISI).

  •  B. Tolaminejad and M. M. Hoseini Athar, "An analytical solution of the ECAE process of bi-layer strip using a Bezier type streamline", Journal of Mechanical Science and Technology, 2016, Vol. 30, pp. 817-826 (ISI).

  •  B. Tolaminejad and M. M. Hoseini Athar," An investigation of microstructure and mechanical properties during ECAE of commercially pure aluminum", Materials Science and Engineering: A, 2016, Vol. 670, pp. 146-152 (ISI).

  •  M. Hoseini Athar and B. Tolaminejad, "Interface morphology and mechanical properties of Al-Cu-Al laminated composites fabricated by explosive welding and subsequent rolling process", Metals and Materials International, 2016, Vol. 22, pp. 670-680 (ISI).

  •  B. Tolaminejad, M. M. Hoseini Athar, H. Arabi and A. Karimi Taheri, " Enhanced grain refinement of commercial pure copper using the ECAE of Al-Cu-Al tri-layer composite", Engineering Science and Technology, an International Journal, 2016, Vol. 19, pp. 254-259 (ISI).

  •  M. Hoseini Athar and B. Tolaminejad, "Weldability window and the effect of interface morphology on the properties of Al/Cu/Al laminated composites fabricated by explosive welding", Materials and Design, 2015, Vol. 86, pp. 516-525 (ISI).

  •  B. Tolaminejad and K. Dehghani, “Microstructural characterization and mechanical properties of nanostructured AA1070 aluminum after equal channel angular extrusion", Materials and Design, 2012, Vol. 34, pp. 285-292 (ISI).

  •   B. Tolaminejad, A. Karimi Taheri, H. Arabi and M. Shahmiri, “Development of crystallographic texture  and grain refinement in the aluminum layer of Cu-Al-Cu tri-layer composite deformed by equal channel angular extrusion”, International Journal of Modern Physics, 2012, Vol. 5, pp. 325-334 (ISI).

  •   B. Tolaminejad, F. Brisset and T. Baudin, “EBSD study of the microstructure evolution in a commercially pure aluminum severely deformed by ECAP”, Materials Science and Engineering, 2012, Vol. 32, 012025 (ISI).

  •   B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, “A kinematical dislocation based model and admissible velocity field for prediction of nanostructural changes and mechanical properties of Al-Cu-Al laminated composite during ECAE process”, Materials and Metallurgy Engineering, 2010, No. 1, pp. 11-22 (ISC).

  •  H. Arabi, S. H. Seyedein, A. Mehryab and B. Tolaminejad, “Mathematical modeling and simulation of the interface region of a tri-layer composite materials, Brass-Steel-Brass, produced by cold rolling”, International Journal of Minerals, Metallurgy and Materials, 2009, Vol. 16, No. 2, pp. 189-196 (ISI).

  •   B. Tolaminejad and H. Arabi, “Effect of chromizing on bonding mechanism of a sheet composite of brass-steel-brass”, Kuwait Journal of Science and Engineering, 2009, Vol. 36, No. 2B, pp. 163-181 (ISI).

  •   B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, “An investigation into the effect of ECAE process on mechanical and microstructural properties of middle layer in copper clad aluminum composite”, Iranian Journal of Materials Science & Engineering, 2009, Vol. 6, No. 4, pp. 26-34 (ISI).

  •   B. Tolaminejad and H. Arabi, “A study of roll-bonding MS90 alloy to steel utilizing chromized interlayer”, Iranian Journal of Science & Technology, Transaction B, Engineering, 2008, Vol. 32, No. B6, pp. 631-640 (ISI).

  •  B. Tolaminejad and H. Omidvar, “A study of sintering effect on the properties of tungsten WHA alloys”, Journal of Materials Engineering- Majlesi, 2010, No. 4, pp. 43-47 / persian.

  •  B. Tolaminejad, “An introduction into the severe plastic deformation, ECAP: Effects on nanostructure and mechanical properties”, Materials World, 2010, No. 7, pp. 14-19 / persian.

  •  B.Tolaminejad, H. Arabi, M. Shahmiri and A. Karimi Taheri, “A primarily study on the deformation parameters and weldability model of aluminum-copper composites during ECAP process”, Journal of Materials Engineering- Majlesi, 2009, No. 3, pp. 25-35 / persian.

  •  B. Tolaminejad, “Evaluation of fuel clad condition during LOCA in the heart of nuclear reactor”, Mechanical Engineering Journal, 2009, No. 58, pp. 47-53 / persian.

  •  B. Tolaminejad, “Modeling and evaluation of the change in dynamic contact angle and morphology of explosive welding interface”, Mechanical Engineering Journal, 2009, No. 57, pp. 48-52 / persian.

  •  V. Amirjahadi, B. Tolaminejad and A. Shokouhfar, “An investigation and prediction of young modulus of single wall carbon nanotubes using artificial neural network”, Nano Space, 2008, No. 15, pp. 19- 25 / persian.

  •  B. Tolaminejad, “Hydrogen storage in metals”, Mechanical Engineering Journal, 2007, No. 46, pp. 36-41 / persian.

  •  B. Tolaminejad, “A new generation of automobile exhaust catalysts”, Mechanical Engineering Journal, 2007, No. 49, pp. 35-39 / persian.

  •  B. Tolaminejad, “Effect of grain size reduction on the binary diagrams of nano-structured materials”, Nano Space, 2007, No. 5, pp. 7-13 / persian.

  •  B. Tolaminejad, “Novel pipe steels for oil and gas”, Mechanical Engineering Journal, 2006, No. 43, pp. 46-48 / persian.

  •  B. Tolaminejad, “Superplasticity”, Mechanical Engineering Journal, 2006, No. 44, pp. 18-21 / persian.

  •  B. Tolaminejad, H. Arabi and A. Mehryab, “An investigation into the bonding mechanisms of MS90-St13-MS90 tri-layer composite during cold roll welding”, Welding Engineering Journal, 2005, No. 20, pp. 24-30 / persian.
<div id="present">مقالات ارائه شده در کنفرانس ها و همایش ها</div>

  • R. Mohammadi and B. Tolaminejad, "An investigation into the welding line characteristics of DCEP-DCEN SMAW with alkaline and rutile electrodes", The 20th National Conference on Welding & Inspection and 9th National Conference on Nondestructive Testing (WI/NDT), Shahrekord University, Nov. 2019.

  •  Z. Sangari Motlagh, B. Tolaminejad and A. Momeni, "Modelling the hot deformation flow curves of 17-4 PH stainless steel using Johnson-Cook constitutive equation", 7th International Engineering Materials & Metallurgy Conference (iMat), Oct. 2018.

  •  F. Mahheidary, B. Tolaminejad and A. Momeni, "An investigation of mechanical properties of graphene oxide / FBE coatings", 7th International Engineering Materials & Metallurgy Conference (iMat), Oct. 2018.

  •  F. Mahheidary, B. Tolaminejad and A. Momeni, "An investigation into the thermal stability and corrosion behavior of epoxy / graphene oxide nano-composite on pipeline coating", 7th International Conference on Nanostructures (ICNS7), Mar. 2018.

  •  F. Mahheidary, B. Tolaminejad and A. Momeni, "Investigation of the mechanical / thermal properties and microstructure of graphene oxide / FBE coatings", The Biennial International Conference on Experimental Solid Mechanics (X-Mech), Feb. 2018.

  •  F. Mahheidary, B. Tolaminejad and A. Momeni, "An Investigation of nano-carbon coatings on pipeline for corrosion protection and thermal stability", The Sixth International Conference on Oil, Gas, Refining and Petrochemical with Focus Relationship between Government, University and Industry (OGPD), Dec. 2017.

  •  Z. Sangari Motlagh, B. Tolaminejad and A. Momeni, "An investigation into the mechanical properties and microstructure of 17-4 PH precipitation hardening stainless steel under hot compression process", 6th International Engineering Materials & Metallurgy Conference (iMat), Oct. 2017.

  •  J. Kh. Dastjerdi and B. Tolaminejad, "Microstructure evolution and mechanical properties of ETP Cu fabricated by multi-pass wire drawing and annealing", 4rd International Engineering Materials & Metallurgy Conference (iMat), Nov. 2015.

  •  M. Hoseini Athar and B. Tolaminejad, “Experimental and theoretical analyses of deformation during the rolling process of explosive-welded tri-layer strips”, Iran International Aluminum Conference (IIAC), May 2014.

  •  M. Hoseini Athar and B. Tolaminejad, “Investigations of the hierarchical microstructure of aluminum-copper explosive joints”, 3rd International Engineering Materials & Metallurgy Conference (iMat), Nov. 2014.

  •  M. Hoseini Athar and B. Tolaminejad, “Interface characterization of Al/Cu/Al tri-layer composites after explosive cladding and rolling process”, 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Dec. 2014.

  •  B. Tolaminejad, A. Karimi Taheri and H. Arabi, “A new scheme to enhance strain distribution and nanostructural homogeneity for ECA-extruded copper”, 4th International Congress on Nanoscience & Nanotechnoloy (ICNN), University of Kashan, Sept. 2012.

  •  B. Tolaminejad, A. Karimi Taheri and M. Shahmiri, “Equal channel angular pressing of Al-Cu-Al laminated composites: Nanostructure and mechanical properties”, 4th International Congress on Nanoscience & Nanotechnoloy (ICNN), University of Kashan, Sept. 2012.

  •  F. Brisset, T. Baudin and  B. Tolaminejad, “Microstructure evolution in an aluminum 1050 alloy deformed by equal angular extrusion”, 12th European Modern Developments and Applications in Microbeam Analysis (EMAS-France), May 2011.

  •  B. Tolaminejad, T. Baudin and  F. Brisset, “EBSD study on the microstructure evolution in an aluminum alloy severely deformed by ECAP”, International Microscoy Congress (IMC17), Rio de Janeiro- Brazil, Sept. 2010.

  •  B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, “An investigation into the effect of ECAE process on mechanical and microstructural properties of middle layer in copper clad aluminum composite”, Iran International Aluminum Conference (IIAC), April 2009.

  •  B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, “Development of crystallographic texture and grain refinement in aluminum layer of Cu-Al-Cu tri-layer composite deformed by equal channel angular extrusion”, 2nd International Conference on Ultrafine grained & Nanostructured Materials, University of Tehran, Nov. 2009.

  •  H. Omidvar, K. Azari and B. Tolaminejad, “A Pilot design of magnesium matrix composite reinforced by steel wire”, 2nd National Manufacturing Engineering Conference, Islamic Azad University of Najafabad, Nov. 2009.

  •  B. Tolaminejad, A. Mehryab and M. R. Narenjian, "Modeling and investigation of the dynamic contact angle variation and interface morphology of St13-MS90 joint", 5th National Conference of Propellants, Explosive and Pyrotechnics (PEP), Malek Ashtar University of Technology, Jun. 2008.

  •  K. Azari, B. Tolaminejad and H. Omidvar, “The application of Taguchi method in the evaluation of weight, vibration and curing parameters in E-glass/epoxy composites produced by filament winding”, 11th Annual Congress of Iranian Society of Metallurgical Engineers, Isfahan University of Technology, Oct. 2007.

  •  B. Tolaminejad, M. Mohri and M. Shahmiri, “Effects of Co binder content and heat treatment on the microstructure and mechanical properties of WC-Co cermets”, 8th National Conference on the Surface Engineering and Heat Treatment, Kerman University, May 2007.

  •  B. Tolaminejad and H. Arabi, "An investigation on mechanisms and mathematical model of MS90-St13 joint with chromium interlayer", 8th National Conference on the Surface Engineering and Heat Treatment, Kerman University, May 2007.

  •  B. Tolaminejad, A. Karimi Taheri, H. Arabi and M. Shahmiri, “Study of ECAE process on the microstructural and mechanical behavior of middle layer in Al/Cu/Al composites”, 4th Conference on Materials and Metals Forming (MATFORM'87), Sharif University of Technology, Apr. 2006.

  •  B. Tolaminejad, H. Arabi and M. Mohri, “Evaluation of effective parameters and mathematical modeling for roll welding of brass MS90 (CDA22000)”, 10th Annual Congress of Iranian Society of Metallurgical Engineers, Ferdowsi University of Mashhad, Nov. 2006.

  •  M. Mohri, M. Goodarzi and B. Tolaminejad, “Effect of mechanical alloying on the reduction of iron oxide from ilmenite in the presence of graphite”, 10th Annual Congress of Iranian Society of Metallurgical Engineers, Ferdowsi University of Mashhad, Nov. 2006.

  •  A. Mehryab, B. Tolaminejad, M. Tamizifar and H. Arabi, "Effect of different surface preparation methods on the quality of cold roll welding of tombak/EN 10130/tombak composites", Steel Symposium 83, Iran Alloy Steel Co. (Yazd), March 2005.

  •  B. Tolaminejad, “Simulation and control of heat treatment furnace”, 5th Annual Student Scientific Conference of Materials Engineering and Metallurgy, Islamic Azad University of Yazd, Sept. 2005.

  •  B. Tolaminejad, “The role of microalloy elements during hot deformation of steel”, 5th Annual Student Scientific Conference of Materials Engineering and Metallurgy, Islamic Azad University of Yazd, Sept. 2005.

  •  B. Tolaminejad, A. Mehryab and H. Arabi, “An interface physical - computerized model in roll welding brass-steel- brass Composite”, 9th Annual Congress of Iranian Society of Metallurgical Engineers, Shiraz University, Nov. 2005.

<div id="invent">اختراعات و اکتشافات</div>
<div id="these">پایان نامه ها</div>

 

کارشناسی: طراحی و ساخت دستگاه آزمایشگاهی پرس و زینتر پودر، دانشگاه صنعتی امیرکبیر (پلی تکنیک تهران) 1379، استاد راهنما: دکتر محمد حلالی

 

کارشناسی ارشد: بررسی تاثیر ضخامت، زبری سطح و اندازه دانه لایه ها بر استحکام جوش نوردی کامپوزیت برنج - فولاد - برنج، دانشگاه علم و صنعت ایران 1382، اساتید راهنما: دکتر حسین عربی و دکتر مرتضی تمیزی فر

 

دکترا: بررسی تئوری و عملی رفتار تغییرشکل کامپوزیتهای لایه ای حین فرآیند ECAE، دانشگاه علم و صنعت ایران 1389، اساتید راهنما: دکتر حسین عربی، دکتر علی کریمی طاهری و دکتر محمد شاهمیری

سوابق
رتبه یک آزمون ورودی دکترای مواد 1382 - دانشگاه علم و صنعت ایران / رتبه دو کارشناسی ارشد شناسایی مواد 1380 - دانشگاه علم و صنعت ایران / دانش آموخته ممتاز دبیرستان البرز 74-1370
<div id="lesson">دروس ارائه شده در ترم</div>

 

کارشناسی ارشد:

ترم 1:   تئوری نابجایی                            ترم 2:   خزش                 فرآیندهای تولید نانو مواد

 

کارشناسی:

ترم 1:       انتخاب مواد مهندسی              خواص مکانیکی I                  روشهای نوین آنالیز

ترم 2:        متالورژی جوشکاری                  زبان تخصصی                  مواد مرکب (کامپوزیتها)

<div id="msg">پیام برای دانشجویان</div>

 

دانشجویان محترم می توانند جهت ارتباط سریع از ایمیل استفاده کنند:  tolaminejad@hut.ac.ir        

 

 
عکس کاور خود را تغییر دهید
tolaminejad
عکس کاور خود را تغییر دهید
مهندسی مواداستادیار
وضعیت این حساب کاربری منتشر شده است

این کاربر هنوزاطلاعات پروفایل خود را بروز نکرده است.

<div id="more">اطلاعات بیشتر</div>
دکتری تخصصی
081-38411444

Mechanical Properties - Metal Forming

Nanostructured Materials/ SPD - Texture

Thermo-mechanics - Welding Metallurgy

<div id="pub">تالیفات</div>
<div id="articles">مقالات چاپ شده در نشریات داخلی و بین المللی</div>

  • Z. Sangari Motlagh, B. Tolaminejad and A. Momeni, "Prediction of hot deformation flow curves of 1.4542 stainless steel", Metals and Materials International2020, (ISI).

  •  S. Ghadar, A. Momeni, B. Tolaminejad and M. Soltanalinejad, "A comparative study on the hot deformation behavior of 410 stainless and K100 tool steels", Materials Science and Engineering: A2019Vol. 760, pp. 394-406 (ISI).

  •  F. Mahheidary, B. Tolaminejad and A. Momeni, "Surface composite on Cu substrate with SiO2 reinforcement fabricated by severe plastic deformation: Microstructure, mechanical and tribological properties", Journal of Alloys and Compounds, 2019Vol. 793, pp. 86-95 (ISI).

  •  B. Tolaminejad and M. M. Hoseini Athar, "An analytical solution of the ECAE process of bi-layer strip using a Bezier type streamline", Journal of Mechanical Science and Technology, 2016, Vol. 30, pp. 817-826 (ISI).

  •  B. Tolaminejad and M. M. Hoseini Athar," An investigation of microstructure and mechanical properties during ECAE of commercially pure aluminum", Materials Science and Engineering: A, 2016, Vol. 670, pp. 146-152 (ISI).

  •  M. Hoseini Athar and B. Tolaminejad, "Interface morphology and mechanical properties of Al-Cu-Al laminated composites fabricated by explosive welding and subsequent rolling process", Metals and Materials International, 2016, Vol. 22, pp. 670-680 (ISI).

  •  B. Tolaminejad, M. M. Hoseini Athar, H. Arabi and A. Karimi Taheri, " Enhanced grain refinement of commercial pure copper using the ECAE of Al-Cu-Al tri-layer composite", Engineering Science and Technology, an International Journal, 2016, Vol. 19, pp. 254-259 (ISI).

  •  M. Hoseini Athar and B. Tolaminejad, "Weldability window and the effect of interface morphology on the properties of Al/Cu/Al laminated composites fabricated by explosive welding", Materials and Design, 2015, Vol. 86, pp. 516-525 (ISI).

  •  B. Tolaminejad and K. Dehghani, “Microstructural characterization and mechanical properties of nanostructured AA1070 aluminum after equal channel angular extrusion", Materials and Design, 2012, Vol. 34, pp. 285-292 (ISI).

  •   B. Tolaminejad, A. Karimi Taheri, H. Arabi and M. Shahmiri, “Development of crystallographic texture  and grain refinement in the aluminum layer of Cu-Al-Cu tri-layer composite deformed by equal channel angular extrusion”, International Journal of Modern Physics, 2012, Vol. 5, pp. 325-334 (ISI).

  •   B. Tolaminejad, F. Brisset and T. Baudin, “EBSD study of the microstructure evolution in a commercially pure aluminum severely deformed by ECAP”, Materials Science and Engineering, 2012, Vol. 32, 012025 (ISI).

  •   B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, “A kinematical dislocation based model and admissible velocity field for prediction of nanostructural changes and mechanical properties of Al-Cu-Al laminated composite during ECAE process”, Materials and Metallurgy Engineering, 2010, No. 1, pp. 11-22 (ISC).

  •  H. Arabi, S. H. Seyedein, A. Mehryab and B. Tolaminejad, “Mathematical modeling and simulation of the interface region of a tri-layer composite materials, Brass-Steel-Brass, produced by cold rolling”, International Journal of Minerals, Metallurgy and Materials, 2009, Vol. 16, No. 2, pp. 189-196 (ISI).

  •   B. Tolaminejad and H. Arabi, “Effect of chromizing on bonding mechanism of a sheet composite of brass-steel-brass”, Kuwait Journal of Science and Engineering, 2009, Vol. 36, No. 2B, pp. 163-181 (ISI).

  •   B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, “An investigation into the effect of ECAE process on mechanical and microstructural properties of middle layer in copper clad aluminum composite”, Iranian Journal of Materials Science & Engineering, 2009, Vol. 6, No. 4, pp. 26-34 (ISI).

  •   B. Tolaminejad and H. Arabi, “A study of roll-bonding MS90 alloy to steel utilizing chromized interlayer”, Iranian Journal of Science & Technology, Transaction B, Engineering, 2008, Vol. 32, No. B6, pp. 631-640 (ISI).

  •  B. Tolaminejad and H. Omidvar, “A study of sintering effect on the properties of tungsten WHA alloys”, Journal of Materials Engineering- Majlesi, 2010, No. 4, pp. 43-47 / persian.

  •  B. Tolaminejad, “An introduction into the severe plastic deformation, ECAP: Effects on nanostructure and mechanical properties”, Materials World, 2010, No. 7, pp. 14-19 / persian.

  •  B.Tolaminejad, H. Arabi, M. Shahmiri and A. Karimi Taheri, “A primarily study on the deformation parameters and weldability model of aluminum-copper composites during ECAP process”, Journal of Materials Engineering- Majlesi, 2009, No. 3, pp. 25-35 / persian.

  •  B. Tolaminejad, “Evaluation of fuel clad condition during LOCA in the heart of nuclear reactor”, Mechanical Engineering Journal, 2009, No. 58, pp. 47-53 / persian.

  •  B. Tolaminejad, “Modeling and evaluation of the change in dynamic contact angle and morphology of explosive welding interface”, Mechanical Engineering Journal, 2009, No. 57, pp. 48-52 / persian.

  •  V. Amirjahadi, B. Tolaminejad and A. Shokouhfar, “An investigation and prediction of young modulus of single wall carbon nanotubes using artificial neural network”, Nano Space, 2008, No. 15, pp. 19- 25 / persian.

  •  B. Tolaminejad, “Hydrogen storage in metals”, Mechanical Engineering Journal, 2007, No. 46, pp. 36-41 / persian.

  •  B. Tolaminejad, “A new generation of automobile exhaust catalysts”, Mechanical Engineering Journal, 2007, No. 49, pp. 35-39 / persian.

  •  B. Tolaminejad, “Effect of grain size reduction on the binary diagrams of nano-structured materials”, Nano Space, 2007, No. 5, pp. 7-13 / persian.

  •  B. Tolaminejad, “Novel pipe steels for oil and gas”, Mechanical Engineering Journal, 2006, No. 43, pp. 46-48 / persian.

  •  B. Tolaminejad, “Superplasticity”, Mechanical Engineering Journal, 2006, No. 44, pp. 18-21 / persian.

  •  B. Tolaminejad, H. Arabi and A. Mehryab, “An investigation into the bonding mechanisms of MS90-St13-MS90 tri-layer composite during cold roll welding”, Welding Engineering Journal, 2005, No. 20, pp. 24-30 / persian.
<div id="present">مقالات ارائه شده در کنفرانس ها و همایش ها</div>

  • R. Mohammadi and B. Tolaminejad, "An investigation into the welding line characteristics of DCEP-DCEN SMAW with alkaline and rutile electrodes", The 20th National Conference on Welding & Inspection and 9th National Conference on Nondestructive Testing (WI/NDT), Shahrekord University, Nov. 2019.

  •  Z. Sangari Motlagh, B. Tolaminejad and A. Momeni, "Modelling the hot deformation flow curves of 17-4 PH stainless steel using Johnson-Cook constitutive equation", 7th International Engineering Materials & Metallurgy Conference (iMat), Oct. 2018.

  •  F. Mahheidary, B. Tolaminejad and A. Momeni, "An investigation of mechanical properties of graphene oxide / FBE coatings", 7th International Engineering Materials & Metallurgy Conference (iMat), Oct. 2018.

  •  F. Mahheidary, B. Tolaminejad and A. Momeni, "An investigation into the thermal stability and corrosion behavior of epoxy / graphene oxide nano-composite on pipeline coating", 7th International Conference on Nanostructures (ICNS7), Mar. 2018.

  •  F. Mahheidary, B. Tolaminejad and A. Momeni, "Investigation of the mechanical / thermal properties and microstructure of graphene oxide / FBE coatings", The Biennial International Conference on Experimental Solid Mechanics (X-Mech), Feb. 2018.

  •  F. Mahheidary, B. Tolaminejad and A. Momeni, "An Investigation of nano-carbon coatings on pipeline for corrosion protection and thermal stability", The Sixth International Conference on Oil, Gas, Refining and Petrochemical with Focus Relationship between Government, University and Industry (OGPD), Dec. 2017.

  •  Z. Sangari Motlagh, B. Tolaminejad and A. Momeni, "An investigation into the mechanical properties and microstructure of 17-4 PH precipitation hardening stainless steel under hot compression process", 6th International Engineering Materials & Metallurgy Conference (iMat), Oct. 2017.

  •  J. Kh. Dastjerdi and B. Tolaminejad, "Microstructure evolution and mechanical properties of ETP Cu fabricated by multi-pass wire drawing and annealing", 4rd International Engineering Materials & Metallurgy Conference (iMat), Nov. 2015.

  •  M. Hoseini Athar and B. Tolaminejad, “Experimental and theoretical analyses of deformation during the rolling process of explosive-welded tri-layer strips”, Iran International Aluminum Conference (IIAC), May 2014.

  •  M. Hoseini Athar and B. Tolaminejad, “Investigations of the hierarchical microstructure of aluminum-copper explosive joints”, 3rd International Engineering Materials & Metallurgy Conference (iMat), Nov. 2014.

  •  M. Hoseini Athar and B. Tolaminejad, “Interface characterization of Al/Cu/Al tri-layer composites after explosive cladding and rolling process”, 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Dec. 2014.

  •  B. Tolaminejad, A. Karimi Taheri and H. Arabi, “A new scheme to enhance strain distribution and nanostructural homogeneity for ECA-extruded copper”, 4th International Congress on Nanoscience & Nanotechnoloy (ICNN), University of Kashan, Sept. 2012.

  •  B. Tolaminejad, A. Karimi Taheri and M. Shahmiri, “Equal channel angular pressing of Al-Cu-Al laminated composites: Nanostructure and mechanical properties”, 4th International Congress on Nanoscience & Nanotechnoloy (ICNN), University of Kashan, Sept. 2012.

  •  F. Brisset, T. Baudin and  B. Tolaminejad, “Microstructure evolution in an aluminum 1050 alloy deformed by equal angular extrusion”, 12th European Modern Developments and Applications in Microbeam Analysis (EMAS-France), May 2011.

  •  B. Tolaminejad, T. Baudin and  F. Brisset, “EBSD study on the microstructure evolution in an aluminum alloy severely deformed by ECAP”, International Microscoy Congress (IMC17), Rio de Janeiro- Brazil, Sept. 2010.

  •  B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, “An investigation into the effect of ECAE process on mechanical and microstructural properties of middle layer in copper clad aluminum composite”, Iran International Aluminum Conference (IIAC), April 2009.

  •  B. Tolaminejad, A. Karimi Taheri, M. Shahmiri and H. Arabi, “Development of crystallographic texture and grain refinement in aluminum layer of Cu-Al-Cu tri-layer composite deformed by equal channel angular extrusion”, 2nd International Conference on Ultrafine grained & Nanostructured Materials, University of Tehran, Nov. 2009.

  •  H. Omidvar, K. Azari and B. Tolaminejad, “A Pilot design of magnesium matrix composite reinforced by steel wire”, 2nd National Manufacturing Engineering Conference, Islamic Azad University of Najafabad, Nov. 2009.

  •  B. Tolaminejad, A. Mehryab and M. R. Narenjian, "Modeling and investigation of the dynamic contact angle variation and interface morphology of St13-MS90 joint", 5th National Conference of Propellants, Explosive and Pyrotechnics (PEP), Malek Ashtar University of Technology, Jun. 2008.

  •  K. Azari, B. Tolaminejad and H. Omidvar, “The application of Taguchi method in the evaluation of weight, vibration and curing parameters in E-glass/epoxy composites produced by filament winding”, 11th Annual Congress of Iranian Society of Metallurgical Engineers, Isfahan University of Technology, Oct. 2007.

  •  B. Tolaminejad, M. Mohri and M. Shahmiri, “Effects of Co binder content and heat treatment on the microstructure and mechanical properties of WC-Co cermets”, 8th National Conference on the Surface Engineering and Heat Treatment, Kerman University, May 2007.

  •  B. Tolaminejad and H. Arabi, "An investigation on mechanisms and mathematical model of MS90-St13 joint with chromium interlayer", 8th National Conference on the Surface Engineering and Heat Treatment, Kerman University, May 2007.

  •  B. Tolaminejad, A. Karimi Taheri, H. Arabi and M. Shahmiri, “Study of ECAE process on the microstructural and mechanical behavior of middle layer in Al/Cu/Al composites”, 4th Conference on Materials and Metals Forming (MATFORM'87), Sharif University of Technology, Apr. 2006.

  •  B. Tolaminejad, H. Arabi and M. Mohri, “Evaluation of effective parameters and mathematical modeling for roll welding of brass MS90 (CDA22000)”, 10th Annual Congress of Iranian Society of Metallurgical Engineers, Ferdowsi University of Mashhad, Nov. 2006.

  •  M. Mohri, M. Goodarzi and B. Tolaminejad, “Effect of mechanical alloying on the reduction of iron oxide from ilmenite in the presence of graphite”, 10th Annual Congress of Iranian Society of Metallurgical Engineers, Ferdowsi University of Mashhad, Nov. 2006.

  •  A. Mehryab, B. Tolaminejad, M. Tamizifar and H. Arabi, "Effect of different surface preparation methods on the quality of cold roll welding of tombak/EN 10130/tombak composites", Steel Symposium 83, Iran Alloy Steel Co. (Yazd), March 2005.

  •  B. Tolaminejad, “Simulation and control of heat treatment furnace”, 5th Annual Student Scientific Conference of Materials Engineering and Metallurgy, Islamic Azad University of Yazd, Sept. 2005.

  •  B. Tolaminejad, “The role of microalloy elements during hot deformation of steel”, 5th Annual Student Scientific Conference of Materials Engineering and Metallurgy, Islamic Azad University of Yazd, Sept. 2005.

  •  B. Tolaminejad, A. Mehryab and H. Arabi, “An interface physical - computerized model in roll welding brass-steel- brass Composite”, 9th Annual Congress of Iranian Society of Metallurgical Engineers, Shiraz University, Nov. 2005.

<div id="invent">اختراعات و اکتشافات</div>
<div id="these">پایان نامه ها</div>

 

کارشناسی: طراحی و ساخت دستگاه آزمایشگاهی پرس و زینتر پودر، دانشگاه صنعتی امیرکبیر (پلی تکنیک تهران) 1379، استاد راهنما: دکتر محمد حلالی

 

کارشناسی ارشد: بررسی تاثیر ضخامت، زبری سطح و اندازه دانه لایه ها بر استحکام جوش نوردی کامپوزیت برنج - فولاد - برنج، دانشگاه علم و صنعت ایران 1382، اساتید راهنما: دکتر حسین عربی و دکتر مرتضی تمیزی فر

 

دکترا: بررسی تئوری و عملی رفتار تغییرشکل کامپوزیتهای لایه ای حین فرآیند ECAE، دانشگاه علم و صنعت ایران 1389، اساتید راهنما: دکتر حسین عربی، دکتر علی کریمی طاهری و دکتر محمد شاهمیری

سوابق
رتبه یک آزمون ورودی دکترای مواد 1382 - دانشگاه علم و صنعت ایران / رتبه دو کارشناسی ارشد شناسایی مواد 1380 - دانشگاه علم و صنعت ایران / دانش آموخته ممتاز دبیرستان البرز 74-1370
<div id="lesson">دروس ارائه شده در ترم</div>

 

کارشناسی ارشد:

ترم 1:   تئوری نابجایی                            ترم 2:   خزش                 فرآیندهای تولید نانو مواد

 

کارشناسی:

ترم 1:       انتخاب مواد مهندسی              خواص مکانیکی I                  روشهای نوین آنالیز

ترم 2:        متالورژی جوشکاری                  زبان تخصصی                  مواد مرکب (کامپوزیتها)

<div id="msg">پیام برای دانشجویان</div>

 

دانشجویان محترم می توانند جهت ارتباط سریع از ایمیل استفاده کنند:  tolaminejad@hut.ac.ir